丰满人妻被公侵犯完整版,黑人巨茎大战欧美白妇,日韩欧美亚洲一区,亚洲成AV人在线观看网址

參考價	面議

參考價

面議

具體成交價以合同協議為準

公司名稱 上海榮計達實驗儀器有限公司
品牌
型號
所在地
廠商性質 生產廠家
更新時間 2023/2/16 9:00:46
訪問次數 230

在線詢價 收藏產品點擊查看聯系電話

索取相關資料

促銷詳情

促銷時間：

特價說明：

促銷詳細：

2020年01月08日至 2020年02月08日

特價促銷

模內澆口分離自動化，降低對人的依賴度；傳統的塑膠模具開模后產品與澆口相連，需二道工序進行人工剪切分離，模內熱切模具將澆口分離提前至開模前，消除后續工序，有利于生產自動化，降低對人的依賴。

詳細信息在線詢價

一、概述：
陶瓷磚綜合測定儀是用于測定各種墻面磚、地面磚尺寸及形狀特性之儀器，其所測參數包括面磚的邊直度、直角度、平整度等幾項指標。測定時，只需一次放置被測試件，便能迅速、準確地測出以上幾項指標數據。
本產品符合：GB/T3810.2-2006/ISO 10545-2-1995《陶瓷磚－尺寸和表面質量的檢驗》的要求。它是陶瓷磚生產廠家和質量檢測部門理想的檢測儀器。
I. Overview:
The ceramic tile comprehensive tester is an instrument used to measure the size and shape characteristics of various wall tiles and floor tiles. The measured parameters include the edge straightness, right angle and flatness of the tile. When measuring, only need to place the test piece once, and the above several index data can be measured quickly and accurately.
This product meets the requirements of GB/T3810.2-2006/ISO 10545-2-1995 "Ceramic Tiles-Inspection of Dimensions and Surface Quality". It is an ideal testing instrument for ceramic tile manufacturers and quality testing departments.

二、主要技術參數（單位:mm）
1、測量精度:±0.1
2、測量范圍：40～600×600；40～800×800；40～1000×1000mm
3、標準板客戶選購（選購件）
4、根據用戶要求可選用數顯表。
2. Main technical parameters (unit: mm)
1. Measurement accuracy: ±0.1
2. Measuring range: 40～600×600; 40～800×800; 40～1000×1000mm
3. Standard board customer purchase (optional)
4. Digital display meter can be selected according to user requirements.

三、原理及結構：
本儀器由支承平板、可移動的左支座和右支座組成一個直角坐標系。在平板上有三個等高支承銷與陶瓷面磚類似外形和具有理想尺寸的標準板進行探測，并將儀表值調整至適當位置，并記下該示值。然后，以被測陶瓷面磚取代標準板，在不移動測量點的情況下，分別測出六項指標參數。左、右支座及中心測量支座可在平板上作平行移動，組成不同位置的空間座標，以適應不同規格尺寸陶瓷面磚的測定。
3. Principle and structure:
This instrument is composed of a support plate, a movable left support and a right support to form a rectangular coordinate system. There are three equal height support pins on the flat plate, which are similar in appearance to the ceramic tile and standard plate with ideal size to detect, adjust the meter value to the appropriate position, and record the indicated value. Then, replace the standard board with the measured ceramic tile, and measure six index parameters without moving the measuring point. The left and right support and the center measurement support can be moved in parallel on the plate to form the spatial coordinates of different positions to suit the determination of ceramic tiles of different specifications and sizes